Fujitsu S510 Operator's Guide - Page 253
Cleaning the Inside of the Scanner, ScanSnap, S510 Operator's Guide, Pad ASSY 1 piece
UPC - 097564307218
View all Fujitsu S510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
8.3 Cleaning the Inside of the Scanner 2. Clean the following locations with a cloth moistened with Cleaner F1. Pad ASSY Plastic roller 8 Daily Care Pick roller Feed roller Eject roller Glass (2 places) ATTENTION It may take long before the cleaner vaporizes if a large quantity is used. When cleaning the scanner parts, dampen a cloth with modest quantities of the cleaner. In addition, wipe off the cleaner completely with a soft lint-free cloth to leave no residue on the surface of the cleaned parts. Turn off the scanner before cleaning the following locations. • Pad ASSY (1 piece) Wipe the Pad ASSY downwards. When cleaning the Pad ASSY, take care to prevent the cloth from catching on the metal parts. • ADF glass surfaces (2 pieces; located on the ADF and opposite side) Clean lightly. • Pick roller (1 piece) Clean lightly taking care not to scratch the surface of the roller. Take particular care in cleaning the Pick roller since black debris on the roller adversely affects the pickup performance. • Plastic rollers (4 pieces on the ADF) Clean them lightly while rotating the rollers with your finger. Be careful not to roughen the surface of the rollers. Take particular care in cleaning the plastic rollers since black debris on the rollers adversely affects the pickup performance. ScanSnap S510 Operator's Guide 233