Fujitsu S510 Operator's Guide - Page 244

Symptom Scanned images are not displayed on the screen (when"Allow automatic blank page removal" is enabled). Scanned images are skewed. The orientation of scanned images is not displayed correctly (when "Allow automatic image rotation" is enabled). The scanned images cannot be read. A part of the document does not appear in the scanned image. A profile cannot be created with currently configured settings. The document is not fed properly or gets jammed. Check This Item When "Allow automatic blank page removal" is enabled, almost blank documents with only a few characters may be accidentally recognized as blank pages and removed from scanned image data. Are the documents fed into the ADF with a skew of more than +/-5 degrees? Depending on the contents of document, the automatic image deskew may not work properly. Depending on the contents of document, the automatic image rotation may not work properly. Have you scanned documents written in small letters? Is the "Allow automatic blank page removal" enabled? Is the ScanSnap in Quick Menu Mode? 1. Is the inside of the scanner dirty? 2. Are you scanning one of the following? Thin paper Torn paper Folded paper Resolution Right-click ScanSnap Manager icon on the task bar, select [Setting] [Scanning] tab and click the [Option] button. Then clear the "Allow automatic blank page removal" checkbox. The "Correct skewed character strings automatically" function can correct skewed images up to +/-5 degrees. Load the document onto the scanner so that the document skew does not exceed this limit. Refer to "Correct skewed character strings automatically." (page 81) Refer to "Allow automatic image rotation." (page 82) When small letters are squashed, right click ScanSnap Manager icon on the task bar and select "Best" or "Excellent" in the [Scanning] tab and scan them again. Clear the check box for "Allow automatic blank page removal" on [Option] of the [Scanning] tab of [Scan and Save Settings] To create a profile with settings you want to use, uncheck [Use ScanSnap Quick Menu] and switch to Left-Click Menu Mode. See section "4.3 Saving Scanning Settings" (page 92). 1. Clean the dirty locations. 2. Use the Carrier Sheet for each page if you have difficulties feeding the document. 224