Ganz Security NR8HL-2TB NR4HLNR8HL User Manual - Page 12
INSTALLATION, Connecting the camera
View all Ganz Security NR8HL-2TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
INSTALLATION Connecting the camera You can connect a PoE-featuring IP camera to the rear [CAM1]~[CAM8], RJ45 port using the CAT5 10/100Mb Ethernet cable without a separate power source. Precautions To secure recording stability from an overloaded network traffic , hacking attempt or DoS (Denial of Service) attack, only the direct cable connection between camera and NVR is allowed. 9 If the IP camera provides the alarm I/O port or Audio I/O port, you can make alarm or audio connection. For more details, refer to the user manual of the IP camera. The Ethernet connection is effective within 100 meter in distance. Beyond that, you may encounter a data loss or failure to connect to the camera. If you need to make cable connection of longer than 100 meters, use a separate PoE extender for cable extension. The total power consumption of the IP cameras should not exceed the rated power capacity of the 48V PoE adaptor. Beyond that, the video may not be played properly or no video will be displayed at all. If this is the case, use a separate (additional) power source for supplying power to the cameras. Camera HUB or Router NVR For stable operation, a dedicated communication line is established for IP cameras in the same network. This is why network router or hub connection is not allowed. ᧭᧮