Ganz Security NR8HL-2TB NR4HLNR8HL User Manual - Page 68
What is the Web Viewer?
View all Ganz Security NR8HL-2TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Web Viewer What is the Web Viewer? Web RA is a user-friendly software application that enables you to control the video data in connection with a remote NVR. System Requirements The following is the minimum hardware and operating system requirements to run Web RA. Operating System Web browsers: Windows XP Professional Windows Vista Home Baisc / Premium Window 7 Internet Explorer 7.0 or later/Mozilla Firefox 3.6/Google Chrome 4.1/Opera 10 Some web browsers other than Internet Explorer may not fully function CPU Intel Pentium 2.0 GHz Memory 512 MB Display 16-bit 1024 x 768 High Color Hard Disk Drive 50MB (space required for installing the web viewer) * Additional HDD space is required for saving your recordings. The file size of your recording may differ depending on the specified quality. Connection Open a browser and enter the IP address of NVR, or type the URL in the address bar. To connect to the NVR from inside 9 Check the "Network Status" and verify the and of the NVR. (page 38) 9 Enter the IP address and web service port in the address bar of the browser. Ex) http://192.168.1.116:8080/ To connect to the NVR from outside Using the IP address 9 Check the "Network Status" and verify the and of the NVR. (page 38) 9 If using a fixed (external) IP, enter the external IP that is specified in the NVR in the address bar of the web browser. Ex) If the internal IP address is set to "http://222.112.4.48:8080" (192.xxx.xxx.xxx), no access from outside is allowed. Using the URL 9 Check the "Network Status" and verify the and of the NVR. (page 38) 9 Enter the DDNS address and web service port in the address bar of the browser. Ex) http://001CB8123456.DVRLINK.NET:8080 z In a router network, you have to set the "Port Forwarding" and "DMZ Setting" to allow access from outside. z For the necessary settings of the router, refer to the user manual of the router or contact the manufacturer of the router. ᧲᧴