Ganz Security NR8HL-2TB NR4HLNR8HL User Manual - Page 33
Audio Setup
View all Ganz Security NR8HL-2TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
System Setting Audio Setup You can configure the settings of the voice and audio signal. AUDIO Choose whether to receive the live sound source and select an audio channel. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to select an item that youwant to edit. >DEFAULT LIVE AUDIO CHANNEL : select an Audio channel to monitor on the live screen. >NETWORK AUDIO TRANSMISSION : decide if NVR transfers the audio signal to the remote client. >RECEIVE NETWORK AUDIO : decide if NVR receives the audio signal from the remote client. 3. To apply the change, click in the bottom of the screen. 4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation message appears and you will return to the previous menu. Buzzer output You can set to output the buzzer if you manipulate the remote control. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to select an item that you want to edit. > REMOTE CONTROL : specify the output of a beep when you press a button on the remote control. 3. To apply the change, click in the bottom ofthe screen. 4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation message appears and you will return to the previous menu. ᧯᧯