Ganz Security NR8HL-2TB NR4HLNR8HL User Manual - Page 31
Monitor, Sequence
View all Ganz Security NR8HL-2TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
System Setting Monitor If you change from monitoring mode to sequence, you will have to set the interval of the sequence. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to set a sequence interval for auto mode to 1 through 60 seconds. 3. To apply the change, click in the bottom of the screen. 4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation message appears and you will return to the previous menu. Sequence Select a split mode for the sequence, and also select a list of active items when the sequence is performed. 1. From - , select . 2. Use the [ʆʈُٙ/ENTER] buttons on the remote control or use the mouse to add a sequence or change the settings of the existing sequence. >ACTIVATION : Select a list that you want to Activate the sequence for. Only one list will become active. >ADD : add a sequence. 3. To apply the change, click in the bottom of the screen. 4. When done, press the [EXIT] button on the remote control or click in the lower screen. The confirmation message appears and you will return to the previous menu. To add a sequence 1. Click in the bottom of the screen. 2. When the "ADD" dialog appears, enter a title using thevirtual keyboard. 3. Enter the name of the sequence and click . 4. When the dialog appears, click . 5. When the "SEQUENCE SETUP" dialog appears, Selecta split mode that you want to add from . ᧯᧭