Garmin zumo 220 Owner's Manual - Page 8
Mounting Your zūmo on the Motorcycle, recommends having an experienced
UPC - 753759101657
View all Garmin zumo 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Getting Started 8. Tilt the zūmo back until it snaps into place. 9. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your zūmo should turn on automatically if it is plugged in and the vehicle is running. Mounting Your zūmo on the Motorcycle ‹ Warning Incorrectly wiring the power cable with bare wire leads can result in damage to the vehicle or the battery and can cause bodily injury. Garmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the unit. Notice To avoid draining the motorcycle battery, disconnect the power cable from your zūmo device when you are not riding. NOTE: Select a suitable and secure location to mount the zūmo on your motorcycle, based on available power sources and safe cable routing. zūmo 200 Series Owner's Manual