Garmin zumo 220 Owner's Manual - Page 9
Installing the Handlebar Base, The zūmo includes parts for two - ram mount
UPC - 753759101657
View all Garmin zumo 220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the Handlebar Base The zūmo includes parts for two handlebar installation solutions. Custom mounts can require additional hardware (www.ram-mount.com). Installing the U-bolt and handlebar base: 1. Place the U-bolt around the handlebar, and thread the ends through the handlebar base. 2. Tighten the nuts to secure the base. Do not overtighten. NOTE: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in. Handlebar Handlebar base U-bolt Getting Started Installing the handlebar base to the clutch/brake clamp bracket: NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch/brake clamp bracket. 1. Remove the two factory bolts on your clutch/brake clamp bracket. 2. Thread the new bolts through the handlebar base, spacers, and clamp bracket. 3. Tighten the bolts to secure the base. Handlebar base Clutch/brake clamp bracket Spacers zūmo 200 Series Owner's Manual