HTC Tattoo User Manual - Page 99
Connecting to a Wi-Fi network with EAP-TLS security, Checking the wireless network status, Connect - root
![]() |
View all HTC Tattoo manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Getting Connected 99 If you selected a secured network, enter the authentication information (such as the WEP key, password, user name, certificate, and/or certificate password), and then tap Connect. Notes • The next time your phone connects to a previously accessed secured wireless network, you will not be prompted to enter the authentication information again, unless you reset your phone to its factory default settings. • Wi-Fi networks are self-discoverable, which means no additional steps are required for your phone to connect to a Wi-Fi network. It may be necessary to provide a username and password for certain closed wireless networks. Connecting to a Wi-Fi network with EAP-TLS security You need to install the network certificate (.pfx) to your phone before you can connect to a Wi-Fi network with EAP-TLS authentication protocol. 1. Save the certificate file to the root folder of the microSD card. 2. On the Wireless controls screen, tap Wi-Fi settings, and then press MENU. 3. Tap Advanced > Security certificates, press MENU, and then tap Add certificate. 4. Select the network certificate needed to connect to the EAP-TLS network. 5. Follow the steps in the previous section to connect to the Wi-Fi network. Checking the wireless network status You can check the current wireless connection status from the following: • Status bar When your phone is connected to a wireless network, the Wi-Fi icon ( ) appears in the status bar and tells you the approximate signal strength (number of bands that light up). If Network notification in Wi-Fi settings is enabled, this icon appears in the status bar whenever the phone detects an available wireless network within range.
![](/manual_guide/products/htc-tattoo-user-manual-ffedb6d/99.png)