HP 11-f100 Maintenance and Service Guide - Page 28
Removal and replacement procedures, Keyboard/top cover
View all HP 11-f100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
5 Removal and replacement procedures CAUTION: Components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures There are as many as 49 screws that must be removed, replaced, and/or loosened when servicing the computer. Make special note of each screw size and location during removal and replacement. Keyboard/top cover Description For use in Thailand Spare part number 809786-281 Description For use in the United States Spare part number 809786-001 Before removing the disassembling the computer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. NOTE: When replacing the keyboard/top cover, be sure that the TouchPad (see TouchPad board on page 23), heat sink (see Heat sink on page 24), and power button board (see Power button board on page 25) are removed from the defective keyboard/top cover and installed on the replacement keyboard/top cover. Remove the keyboard/top cover: 1. Remove the two rear computer feet (1). NOTE: The rear computer feet are included in the Rubber Kit, spare part number 809790-001. 20 Chapter 5 Removal and replacement procedures