HP 11-f100 Maintenance and Service Guide - Page 32
Heat sink, Reverse this procedure to install the TouchPad board.
View all HP 11-f100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Reverse this procedure to install the TouchPad board. Heat sink Description Heat sink (includes replacement thermal material) Spare part number 809938-001 Before removing the heat sink, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 20). Remove the heat sink: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Remove the four Phillips PM2.0×2.8 screws (1) that secure the heat sink to the keyboard/top cover. 3. Remove the heat sink (2). Reverse this procedure to install the heat sink. 24 Chapter 5 Removal and replacement procedures