HP 11-f100 Maintenance and Service Guide - Page 31
TouchPad board, Remove the two Phillips PM2.0×2.0 broad head screws
View all HP 11-f100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Reverse this procedure to install the keyboard/top cover. TouchPad board Description TouchPad board (includes cable and double-sided adhesive) Spare part number 809789-001 Before removing the TouchPad board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 20). Remove the TouchPad button board: 1. Turn the keyboard/top cover upside down with the front toward you. 2. Release the grounding tape strips (1) that conceal the screws that secure the TouchPad board to the keyboard/top cover. 3. Detach the TouchPad board cable (2) from the keyboard/top cover. (The TouchPad board cable is attached to the keyboard/top cover with double-sided adhesive.) 4. Remove the two Phillips PM2.0×2.0 broad head screws (3) that secure the TouchPad board to the keyboard/top cover. 5. Release the TouchPad board (4) by pressing it through the opening in the keyboard/top cover. 6. Remove the TouchPad board and cable. Component replacement procedures 23