HP 11-f100 Maintenance and Service Guide - Page 43

front of the display enclosure., Release the adhesive strip

Get HP 11-f100 PDF manuals and user guides View all HP 11-f100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

a. Remove the display bezel. b. Remove the four Phillips PM2.0×2.9 screws (1) that secure the display panel to the display enclosure. CAUTION: Before turning the display panel upside down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel. c. Lift the top edge of the display panel (2) and swing it up and forward until it rests upside down in front of the display enclosure. d. Release the adhesive strip (1) that secures the display panel cable connector to the display panel. e. Disconnect the display panel cable (2) from the display panel. f. Remove the display panel (3). The display panel is available using spare part number 844147-001. 10. If it is necessary to replace the display panel cable: Component replacement procedures 35

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
a.
Remove the display bezel.
b.
Remove the four Phillips PM2.0×2.9 screws
(1)
that secure the display panel to
the display enclosure.
CAUTION:
Before turning the display panel upside down, make sure the work surface is clear of
tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to
the display panel.
c.
Lift the top edge of the display panel
(2)
and swing it up and forward until it rests upside down in
front of the display enclosure.
d.
Release the adhesive strip
(1)
that secures the display panel cable connector to the display panel.
e.
Disconnect the display panel cable
(2)
from the display panel.
f.
Remove the display panel
(3)
.
The display panel is available using spare part number 844147-001.
10.
If it is necessary to replace the display panel cable:
Component replacement procedures
35