HP 11-f100 Maintenance and Service Guide - Page 49

Speakers, from the system board.

Get HP 11-f100 PDF manuals and user guides View all HP 11-f100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Speakers Description Speaker Kit (includes left and right speakers and cables) Spare part number 809792-001 Before removing the speakers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 20). 5. Disconnect the battery cable from the system board (see Battery on page 26). Remove the speakers: 1. Disconnect the speaker cable (1) from the system board. 2. Release the speaker cables from the routing clips (2) built into the base enclosure. 3. Remove the two Philllips PM2.0×3.3 screws (3) that secure the speakers to the base enclosure. Component replacement procedures 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Speakers
Description
Spare part number
Speaker Kit (includes left and right speakers and cables)
809792-001
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
20
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
26
).
Remove the speakers:
1.
Disconnect the speaker cable
(1)
from the system board.
2.
Release the speaker cables from the routing clips
(2)
built into the base enclosure.
3.
Remove the two Philllips PM2.0×3.3 screws
(3)
that secure the speakers to the base enclosure.
Component replacement procedures
41