HP 14-bp100 Maintenance and Service Guide - Page 39
Remove the four Phillips PM2.0×3.0 screws, that secure the display panel to the top of
View all HP 14-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
a. Remove the four Phillips PM2.0×3.0 screws (1) that secure the display panel to the top of the enclosure. b. Rotate the display panel onto the keyboard (1) to gain access to the display cable connection on the back of the panel. c. On the back of the display panel, release the adhesive strip (2) that secures the display panel cable to the display panel, and then disconnect the cable (3). Component replacement procedures 31
a.
Remove the four Phillips PM2.0×3.0 screws
(1)
that secure the display panel to the top of the
enclosure.
b.
Rotate the display panel onto the keyboard
(1)
to gain access to the display cable connection on
the back of the panel.
c.
On the back of the display panel, release the adhesive strip
(2)
that secures the display panel cable
to the display panel, and then disconnect the cable
(3)
.
Component replacement procedures
31