HP 14-bp100 Maintenance and Service Guide - Page 60
Hard drive cable, Keyboard cable
View all HP 14-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
To remove the system board: 1. Position the computer upright, and then disconnect the following cables from the system board: (1): Display cable (2): Power connector cable (3): Power button board cable (4): USB board cable (5): Speaker cable (6): TouchPad cable (7): Keyboard cable (8): Hard drive cable 2. Remove the four Phillips PM2.0×5.0 screws (1) that secure the system board to the computer. 52 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To remove the system board:
1.
Position the computer upright, and then disconnect the following cables from the system board:
(1)
: Display cable
(2)
: Power connector cable
(3)
: Power button board cable
(4)
: USB board cable
(5)
: Speaker cable
(6)
: TouchPad cable
(7)
: Keyboard cable
(8)
: Hard drive cable
2.
Remove the four Phillips PM2.0×5.0 screws
(1)
that secure the system board to the computer.
52
Chapter 5
Removal and replacement procedures for Authorized Service Provider parts