HP 14-bp100 Maintenance and Service Guide - Page 72
Power connector cable
View all HP 14-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Power connector cable Description Power connector cable Spare part number 808155-021 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). 5. Remove the battery (see Battery on page 34). 6. Remove the display (see Display assembly on page 56). To remove the power connector cable: ▲ Lift the power connector cable straight up and out of the computer. Reverse this procedure to install the power connector cable. 64 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts