HP 14-bp100 Maintenance and Service Guide - Page 42
Battery, To remove the battery
View all HP 14-bp100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Battery Description Battery, 4 cell, 70 Wh, 4.55 Ah Spare part number 920070-855 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 32). To remove the battery: 1. Remove the four Phillips PM2.0×5.0 screws (1) that secure the battery to the computer. 2. Pull the battery away from the system board connector, and then up and out of the computer (2). Reverse this procedure to install the battery. 34 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts