HP 2280tn HP Business Inkjet 2230/2280 - (English) User Guide - Page 29

Step 1: Install the HP Jetdirect EIO Print Server Card, Step 2: Verify that the Printer Works - printer cable

Get HP 2280tn - Business Inkjet Color Printer PDF manuals and user guides View all HP 2280tn manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Step 1: Install the HP Jetdirect EIO Print Server Card The HP Jetdirect card contains electronic components that can be damaged by static electricity. To prevent buildup of static electricity, maintain frequent contact with any bare sheet metal surface on the printer. If possible, wear a grounding wrist strap (or similar device). Handle the card carefully at all times. Avoid touching electronic components or circuit paths. 1 Turn OFF the printer and unplug the power cord. 2 Unscrew and remove the metal plate on either side of the printer. 3 Insert the card. Align the card with the guide rails in the printer. 4 Press the card into the slot until the card is firmly seated. 5 Tighten each thumbscrew a little at a time, alternating between each side until both screws are secure. 6 Connect the network cable to the card. The Jetdirect card can be installed on either side of the printer. Step 2: Verify that the Printer Works 1 Connect the power cord and turn ON the printer. 2 Press the MENU button repeatedly until INFORMATION appears. 3 Press the ITEM button repeatedly until PRINT CONFIGURATION PAGE appears. 4-2 ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
4-2
ENWW
Step 1: Install the HP Jetdirect EIO Print Server
Card
Avoid touching electronic components or circuit paths.
1
Turn OFF the printer and unplug the power cord.
2
Unscrew and remove the metal plate on either side of the printer.
3
Insert the card. Align the card with the guide rails in the printer.
4
Press the card into the slot until the card is firmly seated.
5
Tighten each thumbscrew a little at a time, alternating between
each side until both screws are secure.
6
Connect the network cable to the card.
Step 2: Verify that the Printer Works
1
Connect the power cord and turn ON the printer.
2
Press the
M
ENU
button repeatedly until INFORMATION appears.
3
Press the
I
TEM
button repeatedly until PRINT CONFIGURATION
PAGE appears.
The HP Jetdirect card contains electronic components that can be
damaged by static electricity. To prevent buildup of static electricity,
maintain frequent contact with any bare sheet metal surface on the
printer. If possible, wear a grounding wrist strap (or similar device).
Handle the card carefully at all times.
The Jetdirect card can be installed on either side of the printer.