HP 2280tn HP Business Inkjet 2230/2280 - (English) User Guide - Page 48
Resetting the EIO Card
View all HP 2280tn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Message CFG TCP/IP CFG LINK Value NO YES NO YES Description Selects whether you want to access the TCP/IP menu and set the TCP/IP protocol parameters. In the TCP/IP menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically configured by a BootP or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO, you can manually set the following TCP/IP parameters from the control panel: Each byte of the IP address (IP) l Subnet Mask (SM) l Syslog Server (LG) l Default Gateway (GW) l Idle Timeout period (default is 90 seconds, 0 disables the timeout) When setting IP numbers, press the Value button to increase the number by 1. Hold down the Value button to increase the number by 10. Press the Resume button to make your selection. Selects whether you want to access the LINK menu and set the network speed parameters. AUTO(default):The print server detects the network speed. If it fails, 100T HALF is set. 100T HALF: 100Mbps, half-duplex. 100T FULL: 100Mbps, full-duplex. 10T HALF: 10Mbps, half-duplex. 10T FULL: 10Mbps, full-duplex. Resetting the EIO Card To restore the factory default values to HP Jetdirect EIO print server card: 1 Turn off the printer. 2 While holding down the Item and RESUME buttons on the printer's control panel, turn on the printer. All previously stored EIO settings will be lost. ENWW 6-5