HP 625 Compaq 325 and 326 Notebook PCs HP 425 and 625 Notebook PCs - Maintenan - Page 88
Bluetooth module, Cables, on Battery, Palm rest, Keyboard, Top cover
View all HP 625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Bluetooth module NOTE: The Bluetooth module spare part number is 537921-001 and is used in all countries and regions except Japan and Asia Pacific countries and regions. The Bluetooth module cable is included in the Cable Kit, spare part number 605793-001. See Cables on page 31 for more Cable Kit spare part number information. Before removing the Bluetooth module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). 5. Remove the palm rest (see Palm rest on page 64). 6. Remove the keyboard (see Keyboard on page 67). 7. Remove the top cover (see Top cover on page 71). Remove the Bluetooth module on 39.6-cm (15.6-in) computers: 1. Position the computer right-side up with the front toward you. 2. Disconnect the Bluetooth cable (1) from the system board and remove the antenna (2) from the base enclosure. The antenna is held to the base enclosure with adhesive. Remove the Bluetooth module on 35.6-cm (14.0-in) and 33.8-cm (13.3-in) computers: 1. Position the computer right-side up with the front toward you. 78 Chapter 4 Removal and replacement procedures