HP 6715b HP Compaq 6715b and 6715s Notebook PC HP Compaq 6710b and 6710s Noteb - Page 60

Hard drive, Loosen the Phillips PM2.5×13.0 hard drive retention screw

Get HP 6715b - Compaq Business Notebook PDF manuals and user guides
UPC - 883585514274
View all HP 6715b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Hard drive Description 160-GB, 5400-rpm hard drive 120-GB, 5400-rpm hard drive 80-GB, 7200-rpm hard drive 80-GB, 5400-rpm hard drive Spare part number 443920-001 443919-001 445939-001 443918-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 48). Remove the hard drive: 1. Position the computer with the front toward you. 2. Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer. 3. Lift the left side of the hard drive cover (2), swing it to right, and remove the cover. NOTE: The hard drive cover is included in the Plastics Kit, spare part number 443905-001. 4. Loosen the Phillips PM2.5×13.0 hard drive retention screw (1) that secures the hard drive to the computer. 5. Grasp the Mylar tab (2) on the hard drive and slide the hard drive (3) to the right to disconnect it from the system board. 52 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
Hard drive
Description
Spare part number
160-GB, 5400-rpm hard drive
443920-001
120-GB, 5400-rpm hard drive
443919-001
80-GB, 7200-rpm hard drive
445939-001
80-GB, 5400-rpm hard drive
443918-001
Before disassembling the computer, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
48
).
Remove the hard drive:
1.
Position the computer with the front toward you.
2.
Loosen the two Phillips PM2.0×5.0 screws
(1)
that secure the hard drive cover to the computer.
3.
Lift the left side of the hard drive cover
(2)
, swing it to right, and remove the cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 443905-001.
4.
Loosen the Phillips PM2.5×13.0 hard drive retention screw
(1)
that secures the hard drive to the
computer.
5.
Grasp the Mylar tab
(2)
on the hard drive and slide the hard drive
(3)
to the right to disconnect it
from the system board.
52
Chapter 4
Removal and replacement procedures