HP 6715b HP Compaq 6715b and 6715s Notebook PC HP Compaq 6710b and 6710s Noteb - Page 91

If it is necessary to replace the microphone and cable, disconnect the microphone cable

Get HP 6715b - Compaq Business Notebook PDF manuals and user guides
UPC - 883585514274
View all HP 6715b manuals
Add to My Manuals
Save this manual to your list of manuals

Page 91 highlights

8. Remove the three Torx T8M2.5×9.0 screws that secure the top cover to the computer. 9. Lift the rear edge of the top cover (1) until it disengages from the base enclosure. 10. Swing the rear edge of the top cover (2) toward you until it rests at an angle. 11. Lift the top cover (3) straight up and remove it. 12. If it is necessary to replace the microphone and cable, disconnect the microphone cable (1) from the PC Card/audio board assembly and remove it. NOTE: The microphone is available in the Cable Kit, spare part number 443887-001. Component replacement procedures 83

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
8.
Remove the three Torx T8M2.5×9.0 screws that secure the top cover to the computer.
9.
Lift the rear edge of the top cover
(1)
until it disengages from the base enclosure.
10.
Swing the rear edge of the top cover
(2)
toward you until it rests at an angle.
11.
Lift the top cover
(3)
straight up and remove it.
12.
If it is necessary to replace the microphone and cable, disconnect the microphone cable
(1)
from
the PC Card/audio board assembly and remove it.
NOTE:
The microphone is available in the Cable Kit, spare part number 443887-001.
Component replacement procedures
83