HP 6715b HP Compaq 6715b and 6715s Notebook PC HP Compaq 6710b and 6710s Noteb - Page 85
Remove the two Torx T8M2.5×9.0 screws
UPC - 883585514274
View all HP 6715b manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
2. Remove the wireless antenna cables (2) from the routing channels and clips built into the top cover. 3. Remove the two Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer. NOTE: The screw removed from the left hinge secures a ground loop (2) for the display panel cable. 4. Position the computer with the rear panel toward you. 5. Remove the four Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer. Component replacement procedures 77
2.
Remove the wireless antenna cables
(2)
from the routing channels and clips built into the top cover.
3.
Remove the two Torx T8M2.5×9.0 screws
(1)
that secure the display assembly to the computer.
NOTE:
The screw removed from the left hinge secures a ground loop
(2)
for the display panel
cable.
4.
Position the computer with the rear panel toward you.
5.
Remove the four Torx T8M2.5×9.0 screws
(1)
that secure the display assembly to the computer.
Component replacement procedures
77