HP 6840 HP Deskjet 6800 Printer series - (Windows) User's Guide - Page 49

Ethernet network without an Internet connection, Installing the printer on an Ethernet network,

Page 49 highlights

HP Deskjet 6800 series printer Ethernet network without an Internet connection In this example, the network devices are connected to a hub. Devices use AutoIP to obtain IP addresses. 4.3.3 Installing the printer on an Ethernet network Installing the printer on an Ethernet network is a two-part process. First you must connect the printer to the network. Then you must install the printer software on each computer that will use the printer. • Connecting the printer to an Ethernet network • Installing the printer software 4.3.4 Connecting the printer to an Ethernet network Follow these steps to connect the printer to an Ethernet network: 1. If necessary, set up the printer hardware. For printer hardware setup instructions, see the setup poster that came with the printer. 2. Verify that the printer is powered on. 3. Connect the Ethernet cable to an available port on the network hub or router. Note: Do not plug the Ethernet cable into a port labeled WAN or Uplink. 4. Connect the Ethernet cable to the Ethernet port on the back of the printer. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193

Ethernet network without an Internet connection
In this example, the network devices are connected to a
hub
. Devices use
AutoIP
to obtain IP addresses.
4.3.3
Installing the printer on an Ethernet network
Installing the printer on an Ethernet network is a two-part process.
First you must connect the printer to the network. Then you must install the printer
software on each computer that will use the printer.
Connecting the printer to an Ethernet network
Installing the printer software
4.3.4
Connecting the printer to an Ethernet network
Follow these steps to connect the printer to an Ethernet network:
1.
If necessary, set up the printer hardware.
For printer hardware setup instructions, see the setup poster that came with
the printer.
2.
Verify that the printer is powered on.
3.
Connect the
Ethernet cable
to an available port on the network
hub
or
router
.
Note:
Do not plug the Ethernet cable into a port labeled
WAN
or
Uplink
.
4.
Connect the Ethernet cable to the Ethernet port on the back of the printer.
HP Deskjet 6800 series printer
49