HP 8510p HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 56

Remove the two Torx T8M2.5×6.0 screws, from the display inverter.

Page 56 highlights

6. Release the display bezel bottom edge (3) from the display assembly. 7. Remove the two Torx T8M2.5×6.0 screws (1) that secure the display inverter to the display enclosure. 8. Release the inverter (2) from the display enclosure as far as the display panel cable and backlight cable allow. 9. Disconnect the backlight cable (3) and the display panel cable (4) from the display inverter. 10. Remove the display inverter. Reverse this procedure to install the display inverter. 48 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170

6.
Release the display bezel bottom edge
(3)
from the display assembly.
7.
Remove the two Torx T8M2.5×6.0 screws
(1)
that secure the display inverter to the display
enclosure.
8.
Release the inverter
(2)
from the display enclosure as far as the display panel cable and backlight
cable allow.
9.
Disconnect the backlight cable
(3)
and the display panel cable
(4)
from the display inverter.
10.
Remove the display inverter.
Reverse this procedure to install the display inverter.
48
Chapter 4
Removal and replacement procedures