HP 8510p HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 84
Remove the four Torx T8M2.5×9.0 screws, Two Torx T8M2.5×9.0 screws
UPC - 883585842872
View all HP 8510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
2. Remove the wireless antenna cables from the clips (2) and (3) and routing channels (4) built into the top cover. 3. Remove the following screws: (1) Two Torx T8M2.5×9.0 screws (2) One Phillips PM2.5×4.0 screw (3) Two Phillips PM2.0×2.0 screws 4. Position the computer with the rear panel toward you. 5. Remove the four Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer. 76 Chapter 4 Removal and replacement procedures
2.
Remove the wireless antenna cables from the clips
(2)
and
(3)
and routing channels
(4)
built into
the top cover.
3.
Remove the following screws:
(1)
Two Torx T8M2.5×9.0 screws
(2)
One Phillips PM2.5×4.0 screw
(3)
Two Phillips PM2.0×2.0 screws
4.
Position the computer with the rear panel toward you.
5.
Remove the four Torx T8M2.5×9.0 screws
(1)
that secure the display assembly to the computer.
76
Chapter 4
Removal and replacement procedures