HP 8510p HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 97

PC Card assembly

Get HP 8510p - Compaq Business Notebook PDF manuals and user guides
UPC - 883585842872
View all HP 8510p manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

k. Modem module (see Modem module on page 84) l. System board (see System board and system board frame on page 85) Remove the RJ-11 connector cable: 1. Remove the RJ-11 connector (1) from the clip built into the base enclosure. 2. Remove the RJ-11 connector cable from the clips and routing channel (2) built into the base enclosure. 3. Remove the RJ-11 connector cable from the base enclosure. Reverse this procedure to install the RJ-11 connector cable. PC Card assembly Description PC Card assembly Spare part number 455893-001 Before removing the PC Card assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive on page 49) b. Optical drive (see Optical drive on page 53) c. Keyboard (see Keyboard on page 57) Component replacement procedures 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
k.
Modem module (see
Modem module
on page
84
)
l.
System board (see
System board and system board frame
on page
85
)
Remove the RJ-11 connector cable:
1.
Remove the RJ-11 connector
(1)
from the clip built into the base enclosure.
2.
Remove the RJ-11 connector cable from the clips and routing channel
(2)
built into the base
enclosure.
3.
Remove the RJ-11 connector cable from the base enclosure.
Reverse this procedure to install the RJ-11 connector cable.
PC Card assembly
Description
Spare part number
PC Card assembly
455893-001
Before removing the PC Card assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
45
).
5.
Remove the following components:
a.
Hard drive (see
Hard drive
on page
49
)
b.
Optical drive (see
Optical drive
on page
53
)
c.
Keyboard (see
Keyboard
on page
57
)
Component replacement procedures
89