HP 8510p HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 91
Battery, on Hard drive, Optical drive, Keyboard, Switch cover, TouchPad, Display assembly
UPC - 883585842872
View all HP 8510p manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive on page 49) b. Optical drive (see Optical drive on page 53) c. Keyboard (see Keyboard on page 57) d. Switch cover (see Switch cover on page 71) e. TouchPad (see TouchPad on page 67) f. Display assembly (see Display assembly on page 75) g. Top cover (see Top cover on page 80) Remove the speaker assembly: 1. Disconnect the speaker cable (1) from the system board. 2. Remove the three Phillips PM2.5×4.0 screws (2) that secure the speaker assembly to the base enclosure. 3. Remove the speaker assembly (3) from the base enclosure. Reverse this procedure to install the speaker assembly. Component replacement procedures 83