HP BladeSystem bc2500 Setup and Installation Guide HP BladeSystem bc2000 and b - Page 35

CAUTION, slide easily into the bay, be sure that the blade PC is oriented properly.

Get HP BladeSystem bc2500 - Blade PC PDF manuals and user guides View all HP BladeSystem bc2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

4. Install the blade PC: a. Align the blade PC with the blade PC bay on the enclosure and slide the blade PC partially into the enclosure. b. Press the release latch (1) on the blade PC. c. Pull down the ejector lever (2). CAUTION: The blade PC is keyed to fit only one way in the bay. If the blade PC does not slide easily into the bay, be sure that the blade PC is oriented properly. d. Slide the blade PC inward until the ejector lever engages the enclosure (1). e. Close the ejector lever until you hear an audible click that indicates the blade PC is properly seated (2). NOTE: Install a blade PC for each of the blanks you have removed. 5. Repeat steps 2 to 4 for each blade PC you wish to install. ENWW Installing a Blade PC 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
4.
Install the blade PC:
a.
Align the blade PC with the blade PC bay on the enclosure and slide the blade PC partially
into the enclosure.
b.
Press the release latch (1) on the blade PC.
c.
Pull down the ejector lever (2).
CAUTION:
The blade PC is keyed to fit only one way in the bay. If the blade PC does not
slide easily into the bay, be sure that the blade PC is oriented properly.
d.
Slide the blade PC inward until the ejector lever engages the enclosure (1).
e.
Close the ejector lever until you hear an audible click that indicates the blade PC is properly
seated (2).
NOTE:
Install a blade PC for each of the blanks you have removed.
5.
Repeat steps 2 to 4 for each blade PC you wish to install.
ENWW
Installing a Blade PC
27