HP BladeSystem bc2500 Setup and Installation Guide HP BladeSystem bc2000 and b - Page 82

Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic

Get HP BladeSystem bc2500 - Blade PC PDF manuals and user guides View all HP BladeSystem bc2500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Table D-11 Is the Health LED on the Blade PC Green? (continued) No, it blinks red eight times, once per The blade PC has failed to communicate ● second, followed by a two second pause. with the enclosure during the POST boot cycle. ● ● Remove the blade PC and reinsert it in the enclosure. Move the blade PC to a different bay to see if it may be an enclosure connector issue. Try another enclosure and see if the enclosure health LED is green. ● Replace the blade PC. No, it blinks red nine times, once per second, followed by a two second pause. NIC A or NIC B has failed. Replace the blade PC. Yes it is green. If the health LED on the blade PC is green, go to Table D-12 Is the NIC A or NIC B LED on the Blade PC Illuminated? on page 74. Table D-12 Is the NIC A or NIC B LED on the Blade PC Illuminated? Answer Possible Reasons Possible Solutions No. The NIC is not connected to an active Connect the NIC to an active network network connector. connector. Go to Table D-13 Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic Adapter? on page 74 Yes, it is blinking green. The connector is working normally, the link is active, and data is being transferred. Go to Table D-13 Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic Adapter? on page 74. Yes, it is green. The connector is working normally, and the link is active. Go to Table D-13 Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic Adapter? on page 74. Table D-13 Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic Adapter? Answer Possible Reasons Possible Solutions 74 Appendix D Troubleshooting ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
No, it blinks red eight times, once per
second, followed by a two second pause.
The blade PC has failed to communicate
with the enclosure during the POST boot
cycle.
●
Remove the blade PC and reinsert
it in the enclosure.
●
Move the blade PC to a different
bay to see if it may be an enclosure
connector issue.
●
Try another enclosure and see if the
enclosure health LED is green.
●
Replace the blade PC.
No, it blinks red nine times, once per
second, followed by a two second pause.
NIC A or NIC B has failed.
Replace the blade PC.
Yes it is green.
If the health LED on the blade PC is green, go to
Table
D
-
12
Is the NIC A or NIC B
LED on the Blade PC Illuminated?
on page
74
.
Table D-12
Is the NIC A or NIC B LED on the Blade PC Illuminated?
Answer
Possible Reasons
Possible Solutions
No.
The NIC is not connected to an active
network connector.
Connect the NIC to an active network
connector. Go to
Table
D
-
13
Is the
Monitor Displaying Information When
Connected to the Blade PC Through the
Diagnostic Adapter?
on page
74
Yes, it is blinking green.
The connector is working normally, the link is active, and data is being transferred.
Go to
Table
D
-
13
Is the Monitor Displaying Information When Connected to the
Blade PC Through the Diagnostic Adapter?
on page
74
.
Yes, it is green.
The connector is working normally, and the link is active. Go to
Table
D
-
13
Is the
Monitor Displaying Information When Connected to the Blade PC Through the
Diagnostic Adapter?
on page
74
.
Table D-13
Is the Monitor Displaying Information When Connected to the Blade PC Through the Diagnostic
Adapter?
Answer
Possible Reasons
Possible Solutions
Table D-11
Is the Health LED on the Blade PC Green? (continued)
74
Appendix D
Troubleshooting
ENWW