HP BladeSystem bc2500 Setup and Installation Guide HP BladeSystem bc2000 and b - Page 39
Install SODIMM 1, snap into place 2.
View all HP BladeSystem bc2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
b. Remove the SODIMM from the blade PC (2). 6. Install SODIMM 1: a. Match the notch on the SODIMM with the tab on the SODIMM socket and insert the SODIMM into the socket at a slight angle (1). b. Press the SODIMM down towards the board, ensuring that it is fully seated and the latches snap into place (2). 7. Repeat step 6 to install a second SODIMM into SODIMM slot 2. ENWW Installing Additional Memory 31
b.
Remove the SODIMM from the blade PC (2).
6.
Install SODIMM 1:
a.
Match the notch on the SODIMM with the tab on the SODIMM socket and insert the SODIMM
into the socket at a slight angle (1).
b.
Press the SODIMM down towards the board, ensuring that it is fully seated and the latches
snap into place (2).
7.
Repeat step 6 to install a second SODIMM into SODIMM slot 2.
ENWW
Installing Additional Memory
31