HP Brio 81XX hp brio 81xx, upgrade guide - Page 31

Installing Video Memory on the MGA Millennium Card

Get HP Brio 81XX PDF manuals and user guides View all HP Brio 81XX manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2 Installing Accessories in Your Computer Installing Video Memory Installing Video Memory on the MGA Millennium Card 1 Remove the computer's cover (refer to "Removing the Cover" on page 22). Remember to disconnect the display connector from the back of the video card. 2 Remove the airflow guide to improve access to the backplane (refer to "Removing the Air Flow Guide" on page 24). 3 Carefully remove the MGA Millennium card (refer to steps 3, 4 and 5 of "Removing an Expansion Card" on page 41). 4 Install the memory module on the card. VESA Feature Connector 5 Carefully slide the card back into its slot (refer to steps 5, 6 and 7 of "Installing an Expansion Card" on page 36). 6 Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power cords and any telecommunications cables. Remember to reconnect the display connector to the back of the video card. 7 Turn on the display, let it warm up, and then turn on the computer. Press the key while F2=Setup is displayed at the bottom of the screen. This displays a summary screen showing the computer's configuration details. Check that the new memory is recognized (in the Video RAM field). 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
31
2
Installing Accessories in Your Computer
Installing Video Memory
Installing Video Memory on the MGA Millennium Card
1
Remove the computer’s cover (refer to
“
Removing the Cover
” on page 22
). Remember to disconnect the display
connector from the back of the video card.
2
Remove the airflow guide to improve access to the backplane (refer to
“
Removing the Air Flow Guide
” on page 24
).
3
Carefully remove the MGA Millennium card (refer to steps 3, 4 and 5 of
“
Removing an Expansion Card
” on page 41
).
4
Install the memory module on the card.
5
Carefully slide the card back into its slot (refer to steps 5, 6 and 7 of
“
Installing an Expansion Card
” on page 36
).
6
Install any other accessories before replacing the airflow guide and the cover, and reconnecting the power cords and
any telecommunications cables. Remember to reconnect the display connector to the back of the video card.
7
Turn on the display, let it warm up, and then turn on the computer. Press the
key while
F2=Setup
is displayed
at the bottom of the screen. This displays a summary screen showing the computer’s configuration details. Check that
the new memory is recognized (in the Video RAM field).
VESA Feature
Connector