HP Brio 81XX hp brio 81xx, upgrade guide - Page 44
System Board, Connectors, Zip Drives or IDE Hard Disk Drives
View all HP Brio 81XX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
System Board Connectors 2 Installing Accessories in Your Computer Installing Storage Devices If you add a floppy disk drive, hard disk drive, zip drive, or tape drive, you need to connect it to power and data cables. The data cables are shown below. Connector for 5.25-inch Floppy Disk Drive or Tape Drive (some types) or 3.5-inch Floppy Disk Drive (some types) Connectors for IDE Hard Disk Drives Connectors for 3.5-inch Floppy Disk Drives (some types) or Tape Drives (some types) Connectors for IDE CD-ROM Drives, Zip Drives or IDE Hard Disk Drives Note You may install a non-IDE storage device, but this requires an expansion card and driver software. Contact your HP-authorized support agent or reseller for information. If you install a hard disk drive and connect it to the same cable to which the CD-ROM drive is connected, the hard disk drive must be connected to the middle connector, not the end connector. If you have a CD-ROM drive currently connected to the middle connector, you must reconnect the CD-ROM drive to the end connector of the cable, and then attach the new hard disk drive to the middle connector. 44