HP Brocade 8/12c Brocade Network Advisor Migration Guide v11.1x (53-1002321-01 - Page 57
Internal FTP Server, FTP Server, Server IP Configuration
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Network Advisor migration 7. Select Internal FTP Server or External FTP Server on the FTP Server screen and click Next. The default selection reflects the previous Professional Plus edition configuration. If port 21 is busy, a message displays. Click OK to close the message and continue. Once the Management application is configured make sure port 21 is free and restart the Server to start the FTP service. NOTE If you select to use an FTP Server which is not configured on the same machine as Network Advisor, the Firmware Repository feature will not be available. 8. Complete the following steps on the Server IP Configuration screen. FIGURE 21 Server IP Configuration screen a. Select an address from the Server IP Configuration list. b. Select an address from the Switch - Server IP Configuration Preferred Address list. c. Click Next. If DNS is not configured for your network, do not select the 'hostname' option from either the Server IP Configuration or Switch - Server IP Configuration Preferred Address list. Selecting the 'hostname' option prevents clients and devices from communicating with the Server. If you select a specific IP address from the Server IP Configuration screen and the selected IP address changes, you will not be able to connect to the server. To change the IP address, refer to "Configuring an explicit server IP address" on page 78. Brocade Network Advisor Migration Guide 53-1002321-01 57 of 82