HP Brocade 8/12c Brocade Network Advisor Migration Guide v11.1x (53-1002321-01 - Page 76
HP Brocade 8/12c Manual
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Unsupported server migration d. Enter a port number in the Starting Port # field (default is 24600). NOTE The server requires 16 consecutive free ports beginning with the starting port number. e. Enter a port number in the Syslog Port # field (default is 514). NOTE If the default syslog port number is already in use, you will not receive any syslog messages from the device. To find and stop the process currently running on the default Syslog port number, refer to "Syslog troubleshooting" on page 80. f. Enter a port number in the SNMP Port # field (default is 162). g. Click Next. If you enter a syslog port number already in use, a message displays. Click No on the message to remain on the Server Configuration screen and edit the syslog port number. Click Yes to close the message and continue with step 12. If you enter a port number already in use, a warning displays next to the associated port number field. Edit that port number and click Next. 13. (SAN with SMI Agent) Complete the following steps on the SMI Agent Configuration screen. FIGURE 37 SMI Agent Configuration screen a. Enable the SMI Agent by selecting the Enable SMI Agent check box. b. Enable the SLP by selecting the Enable SLP check box, if necessary. Only enabled after you select the Enable SMI Agent check box. c. Enable the SSL by selecting the Enable SSL check box, if necessary. Only enabled after you select the Enable SMI Agent check box. d. Enter the SMI Agent port number in the SMI Agent Port # field (default is 5989 if SSL Enabled is selected; otherwise, the default is 5988). e. Click Next. 76 of 82 Brocade Network Advisor Migration Guide 53-1002321-01