HP Cluster Platform Interconnects v2010 Gigabit Ethernet Interconnect Guide - Page 38

ProCurve 10/100/1000–T xl Module, The chassis LEDs go off except Power, Self Test, Fan Status

Get HP Cluster Platform Interconnects v2010 PDF manuals and user guides View all HP Cluster Platform Interconnects v2010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

During the self test, the following sequence of events occurs: • All the switch chassis LEDs go on. • After approximately 30 seconds, all the module LEDs go on as the modules receive power and code is downloaded to them. • The Fault LED goes off. • The chassis LEDs go off except Power, Self Test, Fan Status, and Power Status. • When the download of code to the modules is completed, the module LEDs go off. • Each port LED goes on briefly, in sequence, as the port is tested. • The Fault and Self Test LEDs go off when the self test successfully finishes. The Power LED stays on, along with the Status LEDs on the switch chassis for the devices installed. There is one status LED for each switch module, for each power supply, and one for all of the fans installed. • The port LEDs on the switch modules go into their normal operational mode. If the ports are connected to active network devices, the Link LEDs stay on and the Mode LEDs behave according to the mode selected. In the default mode (Activity), the Mode LEDs should flicker showing network activity on the port. If the ports are not connected to active network devices, the LEDs will stay off. 5.2 ProCurve 10/100/1000-T xl Module HP Cluster Platform Gigabit Ethernet solutions use HP ProCurve 10/100/1000-T xl modules (see Figure 5-3). Figure 5-3 ProCurve 10/100/1000-T xl Module 2 1 3 4 1 The following list corresponds to the callouts shown in Figure 5-3: 1. Retaining screws 2. Link and Mode LEDs 3. 10/100/1000 ports 4. Dual personality ports (10/100/1000Base-T or mini-GBIC) The HP ProCurve 10/100/1000Base-T xl module (J4907A) includes the following features: • 14 10/100/ 1000-T ports with RJ-45 connectors • 2 dual personality ports: 10/100/1000Base-T or mini- GBIC • Full duplex operation on all ports • Auto-enabled ports - the ports are all configured to be ready for network operation as soon as a viable network cable is connected 38 HP ProCurve 5308xl

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
During the self test, the following sequence of events occurs:
•
All the switch chassis LEDs go on.
•
After approximately 30 seconds, all the module LEDs go on as the modules receive power
and code is downloaded to them.
•
The Fault LED goes off.
•
The chassis LEDs go off except Power, Self Test, Fan Status, and Power Status.
•
When the download of code to the modules is completed, the module LEDs go off.
•
Each port LED goes on briefly, in sequence, as the port is tested.
•
The Fault and Self Test LEDs go off when the self test successfully finishes. The Power LED
stays on, along with the Status LEDs on the switch chassis for the devices installed. There
is one status LED for each switch module, for each power supply, and one for all of the fans
installed.
•
The port LEDs on the switch modules go into their normal operational mode. If the ports
are connected to active network devices, the Link LEDs stay on and the Mode LEDs behave
according to the mode selected. In the default mode (Activity), the Mode LEDs should flicker
showing network activity on the port. If the ports are not connected to active network devices,
the LEDs will stay off.
5.2 ProCurve 10/100/1000–T xl Module
HP Cluster Platform Gigabit Ethernet solutions use HP ProCurve 10/100/1000-T xl modules (see
Figure 5-3
).
Figure 5-3 ProCurve 10/100/1000–T xl Module
1
3
1
4
2
The following list corresponds to the callouts shown in
Figure 5-3
:
1.
Retaining screws
2.
Link and Mode LEDs
3.
10/100/1000 ports
4.
Dual personality ports (10/100/1000Base–T or mini-GBIC)
The HP ProCurve 10/100/1000Base-T xl module (J4907A) includes the following features:
•
14 10/100/ 1000-T ports with RJ-45 connectors
•
2 dual personality ports: 10/100/1000Base-T or mini- GBIC
•
Full duplex operation on all ports
•
Auto-enabled ports — the ports are all configured to be ready for network operation as soon
as a viable network cable is connected
38
HP ProCurve 5308xl