HP Cluster Platform Interconnects v2010 Gigabit Ethernet Interconnect Guide - Page 51
HP ProCurve Switch 5400zl 24 port Gig-T PoE Module
View all HP Cluster Platform Interconnects v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Figure 6-4 HP ProCurve 5412zl-96G Rear View 1 3 3 4 2 The following list corresponds to the callouts in Figure 6-4. 1. Power and Fault 2. AC power connectors 3. Optional power supply bays 4. Fan tray Caution: Refer to the ProCurve Series 5400zl Switches Installation and Getting Started Guide for proper power cord selection. Disconnect AC power from the power supply before installing or removing the supply. Otherwise, damage to the equipment may result. Note: On the 5412zl, one power supply will only supply enough power to run the module slots A-F. Slots G-L will not receive any power unless there are at least two power supplies installed. 6.3 HP ProCurve Switch 5400zl 24 port Gig-T PoE Module The HP ProCurve Switch 5400zl 24 port Gig-T PoE Module has 24 twisted-pair ports with RJ-45 connectors for 10/100/1000 Mbps (Gigabit) or 100 Mbps operation over Category 5 or better 100-ohm UTP or STP cable (category 5e recommended for Gigabit). All ports have the IEEE 802.3ab Auto MDI/MDI-X (HP Auto-MDIX) feature and support IEEE 802.3af PoE. Figure 6-5 shows a ProCurve Switch 5400zl 24-port Gig-T PoE Module. 6.3 HP ProCurve Switch 5400zl 24 port Gig-T PoE Module 51