HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 49
Display assembly, Disconnect the wireless antenna cables from the WLAN module see
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
5. Remove the base enclosure. Reverse this procedure to install the base enclosure. Display assembly Description 15.6-in, BrightView, FHD, LED, TouchScreen display assembly 15.6-in, BrightView, HD, LED, TouchScreen display assembly Spare part number 720550-001 720549-001 To remove the display assembly and access the display assembly subcomponents, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28). 5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 29). 6. Remove the hard drive (see Hard drive on page 32). 7. Remove the base enclosure (see Base enclosure on page 39). Component replacement procedures 41