HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 71
Keyboard, and then remove the following components
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
4. Remove the power button board (4). Reverse this procedure to install the power button board. Keyboard NOTE: The keyboard spare part kit includes a keyboard cable. For use in country/region Spare part number Keyboard in natural silver finish with backlight (includes keyboard cable and backlight cable): For use in Canada 760743-DB1 For use in the United States 760743-DB1 Before removing the keyboard, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Service cover (see WLAN module on page 29) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 39) d. System board (see System board on page 45) Component replacement procedures 63