HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 52
Fan, Base enclosure see
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
9. Remove the display assembly (2) from the computer. Fan Reverse this procedure to install the display assembly. Description Fan (includes cable) Spare part number 720235-001 Before removing the fan, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Service cover (see WLAN module on page 29) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 39) d. Display assembly (see Display assembly on page 41) Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillips PM2.5×4.5 screws (2) that secure the fan to the top cover. 44 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts