HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 64
Subwoofer, Remove the battery see
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Remove the power connector cable: 1. Disconnect the power cable (1) from the system board. 2. Release the power connector cable from the clips (2) built into the keyboard shield. 3. Release the power connector (3) from the clips and mold built into the top cover. 4. Remove the power connector cable. Reverse this procedure to install the power connector cable. Subwoofer Description Subwoofer (includes cable and 3 isolators) Spare part number 720563-001 Before removing the subwoofer, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Service cover (see WLAN module on page 29) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 39) 56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts