HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 65
Remove the subwoofer, performance of the subwoofer.
View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Remove the subwoofer: 1. Disconnect the subwoofer cable (1) from the system board. 2. Remove the three Phillips PM2.5×6.2 screws (2) that secure the subwoofer to the top cover. 3. Remove the subwoofer (3). NOTE: The subwoofer includes three rubber isolators (4). These isolators are crucial to the performance of the subwoofer. Reverse this procedure to install the subwoofer. Component replacement procedures 57
Remove the subwoofer:
1.
Disconnect the subwoofer cable
(1)
from the system board.
2.
Remove the three Phillips PM2.5×6.2 screws
(2)
that secure the subwoofer to the top cover.
3.
Remove the subwoofer
(3)
.
NOTE:
The subwoofer includes three rubber isolators
(4)
. These isolators are crucial to the
performance of the subwoofer.
Reverse this procedure to install the subwoofer.
Component replacement procedures
57