HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 72

Partially open the computer.

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

e. Connector board (see Connector board on page 54) f. Subwoofer (see Subwoofer on page 56) g. Rear speaker (see Speakers on page 58) h. Power button board (see Power button board on page 62) Remove the keyboard: 1. Remove the seven Phillips PM2.0×2.9 screws (1) that secure the keyboard shield to the computer. 2. Release the ground loop tape (2). 3. Remove the keyboard shield (3). CAUTION: When removing the keyboard shield, make sure the keyboard cable and backlight cable are not damaged when being released through the opening in the keyboard shield. The keyboard shield is available using spare part number 760037-001. 4. Partially open the computer. 5. Insert a thin tool into the keyboard release hole in the memory module compartment, and then press on the back of the keyboard until the keyboard disengages from the computer. 6. Turn the computer right-side up with the front toward you. 7. Remove the two Phillips PM2.0×2.9 screws (1) that secure the keyboard to the top cover. 8. Release the keyboard (2) by sliding it toward the TouchPad. 64 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
e.
Connector board (see
Connector board
on page
54
)
f.
Subwoofer (see
Subwoofer
on page
56
)
g.
Rear speaker (see
Speakers
on page
58
)
h.
Power button board (see
Power button board
on page
62
)
Remove the keyboard:
1.
Remove the seven Phillips PM2.0×2.9 screws
(1)
that secure the keyboard shield to the computer.
2.
Release the ground loop tape
(2)
.
3.
Remove the keyboard shield
(3)
.
CAUTION:
When removing the keyboard shield, make sure the keyboard cable and backlight
cable are not damaged when being released through the opening in the keyboard shield.
The keyboard shield is available using spare part number 760037-001.
4.
Partially open the computer.
5.
Insert a thin tool into the keyboard release hole in the memory module compartment, and then
press on the back of the keyboard until the keyboard disengages from the computer.
6.
Turn the computer right-side up with the front toward you.
7.
Remove the two Phillips PM2.0×2.9 screws
(1)
that secure the keyboard to the top cover.
8.
Release the keyboard
(2)
by sliding it toward the TouchPad.
64
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts