HP ENVY m6-n012dx HP ENVY m6 Notebook PC Maintenance and Service Guide - Page 68

TouchPad assembly, Remove the TouchPad

Get HP ENVY m6-n012dx PDF manuals and user guides View all HP ENVY m6-n012dx manuals
Add to My Manuals
Save this manual to your list of manuals

Page 68 highlights

TouchPad assembly Description TouchPad assembly (includes TouchPad bracket, TouchPad button board, TouchPad, and cables) Spare part number 760041-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 28), and then remove the following components: a. Service cover (see WLAN module on page 29) b. Hard drive (see Hard drive on page 32) c. Base enclosure (see Base enclosure on page 39) d. System board (see System board on page 45) Remove the TouchPad: 1. Remove the six Phillips PM2.0×2.9 screws (1) that secure the TouchPad bracket to the top cover. 2. Remove the TouchPad bracket (2). 60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
TouchPad assembly
Description
Spare part number
TouchPad assembly (includes TouchPad bracket, TouchPad button board, TouchPad, and cables)
760041-001
Before removing the TouchPad, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
28
), and then remove the following components:
a.
Service cover (see
WLAN module
on page
29
)
b.
Hard drive (see
Hard drive
on page
32
)
c.
Base enclosure (see
Base enclosure
on page
39
)
d.
System board (see
System board
on page
45
)
Remove the TouchPad:
1.
Remove the six Phillips PM2.0×2.9 screws
(1)
that secure the TouchPad bracket to the top cover.
2.
Remove the TouchPad bracket
(2)
.
60
Chapter 6
Removal and replacement procedures for Authorized Service Provider parts