HP EliteBook G7 Maintenance and Service Guide - Page 47
the memory modules, Before removing the memory, follow these steps
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Before removing the memory, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Disconnect the battery cable from the system board (see Battery on page 45). If you are replacing a memory module, remove the existing memory module: 1. Use the tab (1) to lift the cover off the memory modules (2). The cover is held in place by clips on the system board. Component replacement procedures 37
Before removing the memory, follow these steps:
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
35
).
2.
Remove the bottom cover (
Bottom cover
on page
35
).
3.
Disconnect the battery cable from the system board (see
Battery
on page
45
).
If you are replacing a memory module, remove the existing memory module:
1.
Use the tab
(1)
to lift the cover
off
the memory modules
(2)
. The cover is held in place by clips on the
system board.
Component replacement procedures
37