HP EliteBook G7 Maintenance and Service Guide - Page 61
USB board, Disconnect the larger cable from the ZIF connector on the USB board
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3. Remove the power connector cable from the computer (3). Reverse this procedure to install the power connector cable. USB board To remove the USB board, use this procedure and illustration. Table 6-6 USB board description and part number Description USB board USB board cables (included in Cable Kit) USB bracket (included in Bracket Kit) Spare part number M07207-001 M08526-001 M08556-001 Before removing the USB board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Disconnect the battery cable from the system board (see Battery on page 45). Remove the USB board: 1. Disconnect the smaller cable from the USB board (1). 2. Disconnect the larger cable from the ZIF connector on the USB board (2). 3. Remove the three Phillips M2.0 × 4.0 screws (3) that secure the board to the computer, and then remove the bracket from the board (4). Component replacement procedures 51