HP EliteBook G7 Maintenance and Service Guide - Page 62
Fingerprint reader board, Preparation for disassembly, on Bottom cover, Battery
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. Remove the board from the computer (5). Reverse this procedure to install the USB board. Fingerprint reader board To remove the fingerprint reader board, use this procedure and illustration. Table 6-7 Fingerprint reader board description and part number Description Fingerprint reader board Fingerprint reader board cable (included in Cable Kit) Fingerprint reader board bracket (included in Bracket Kit) Spare part number M07206-001 M08526-001 M08556-001 Before removing the fingerprint reader board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Remove the battery (see Battery on page 45). Remove the fingerprint reader board: 1. Disconnect the cable from the ZIF connector on the fingerprint reader board (1). 2. Remove the Phillips M2.0 × 2.0 screw (2) that secures the fingerprint reader bracket to the computer, and then remove the bracket (3). 52 Chapter 6 Removal and replacement procedures for authorized service provider parts