HP EliteBook G7 Maintenance and Service Guide - Page 53
Remove the Phillips M2.0 × 2.5 screw, Remove the solid-state drive
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Remove the solid-state drive: ▲ Use the tab (1) to lift the cover off the solid-state drive (2). The cover is held in place by clips on the system board. 1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer. 2. Pull the drive away from the socket to remove it (2). Component replacement procedures 43
Remove the solid-state drive:
▲
Use the tab
(1)
to lift the cover
off
the solid-state drive
(2)
. The cover is held in place by clips on the
system board.
1.
Remove the Phillips M2.0 × 2.5 screw
(1)
that secures the drive to the computer.
2.
Pull the drive away from the socket to remove it
(2)
.
Component replacement procedures
43