HP EliteBook G7 Maintenance and Service Guide - Page 59
Card reader board, Remove the card reader board
View all HP EliteBook G7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
4. Remove the speakers from the computer (4) . Reverse this procedure to install the speakers. Card reader board To remove the card reader board, use this procedure and illustration. Table 6-4 Card reader board description and part number Description Card reader board Card reader board cable (included in Cable Kit) Spare part number M08551-001 M08526-001 Before removing the card reader board, follow these steps: 1. Prepare the computer for disassembly (Preparation for disassembly on page 35). 2. Remove the bottom cover (Bottom cover on page 35). 3. Remove the battery (see Battery on page 45). 4. Remove the left speaker (see Speakers on page 48). Remove the card reader board: 1. Disconnect the cable from the reverse ZIF connector on the card reader board (1). 2. Remove the three Phillips M2.0 × 2.0 screws (2) that secure the board to the computer. Component replacement procedures 49